revlimiter Gauges - Version F1 Stage 2

Details

• All-plastic, hand-crafted gauge face set for all NB Miatas (98-05).
• Matte finish. Black face, white text.
• Amber backlighting. You will need to remove the stock green bulb covers.
• Green and "clear" backlighting are also available. Clear lights up the color of whatever bulb you have installed.
• 5 o'clock tach zero position.
• 0-8400 RPM, 0-160 MPH.
• km/h version also available.
• Redline at 7200.
• High beam indicator is relocated to the left corner (where the CRUISE indicator lived) and the CEL indicator is moved to the right hand corner (unused on many Miatas)`.



• You will need to trim some plastic out of your stock gauge cluster to make the whole tach/speedometer face illuminate. Instructions can be found here.
• You will need to remove the needle stoppers from your stock gauges and glue them onto your new gauges. Instructions can also be found here.

Day Mode

The gauge cluster is not included. You only get the faces. The cluster is just there for pix.



Notice the high beam indicator on the left corner.



The CEL is also relocated. It's now on the right corner.

Night Mode

Amber lighting at night. It is not quite perfect. The lower corners of the tach and speedo are darker due to the small computer box that controls the odometer. At this time, there's no way I can brighten those areas. But in day to day use, it's not so bad having those small areas a bit dark.



This is the little computer box referred to above. It actually touches the back side of the tach face.



High beam indicator moved to the right corner.

How to Order

Orders are done via email. The gauges are hand crafted, one set at a time. They're made by one guy, the dude who runs this website and drives Sharka. Please be aware that you might have a short wait time between placing your order and when I'm able to make you a set of gauges.

Go hit the order form and we can get the process started.